Kickr and Lynx together setup questions
Posted: Wed Oct 03, 2018 8:38 am
Hi some setup questions
I have been using the lynx trainer and software no problems
I added a kickr to the mix
so I now have a kickr and lynx trainer attached.
2 separate people riding the veloreality
Everything seems fine on the kickr setup
the ant devices show up properly in set up with heart rate
calibration seemed to have worked fine
checked to make sure that the grade reduction not set to zero
checked off eliminate descends
set up a completely new folder and made a copy of the v_ride.x64 was copied into new folder, new person registered(2nd registration for same software riding in same environment). downloaded updated software
trainers are close to ant sticks, new batteries to HR strap for Kickr
auto login is set to yes
When I load the veloreality software the real time BPM shows up on the dashboard
When she starts to ride there is no response from veloreality. No mph, no video movement, no power etc
basically what I am trying to do is be able to ride together as a group and also separately
Any suggestions? What do I need to do to get to work
Please note I know this set up is being seen by the system. sorry to add but when I load ergvideo using the Kickr and also the FEC software simulation for the lynx, ergvideo works fine for both bikes different setups
thank you
I have been using the lynx trainer and software no problems
I added a kickr to the mix
so I now have a kickr and lynx trainer attached.
2 separate people riding the veloreality
Everything seems fine on the kickr setup
the ant devices show up properly in set up with heart rate
calibration seemed to have worked fine
checked to make sure that the grade reduction not set to zero
checked off eliminate descends
set up a completely new folder and made a copy of the v_ride.x64 was copied into new folder, new person registered(2nd registration for same software riding in same environment). downloaded updated software
trainers are close to ant sticks, new batteries to HR strap for Kickr
auto login is set to yes
When I load the veloreality software the real time BPM shows up on the dashboard
When she starts to ride there is no response from veloreality. No mph, no video movement, no power etc
basically what I am trying to do is be able to ride together as a group and also separately
Any suggestions? What do I need to do to get to work
Please note I know this set up is being seen by the system. sorry to add but when I load ergvideo using the Kickr and also the FEC software simulation for the lynx, ergvideo works fine for both bikes different setups
thank you