[Fixed] v1.5.0.135 : Custom rides - video area does not always track video accordingly to position of the slider

Get answers to question about the software.
Post Reply
User avatar
Bradox78
Posts: 44
Joined: Mon Mar 02, 2015 3:13 am
Location: Near Paris, France

[Fixed] v1.5.0.135 : Custom rides - video area does not always track video accordingly to position of the slider

Post by Bradox78 »

I just noticed that when I use small up/down buttons in the video tracking area or when I move the sliders, the video area of the screen does not always track the video accordingly to the position of the slider.

Here an example :

When the slider is on the "0 m" position, the correct frame is displayed.

Image

If I move the slider to the "4866 m" position, the frame displayed is still the frame of the "0 m" position.

Image

If I click on the small up button to move to the "4867 m" position, the frame displayed is correct.

Image

If I click again on the small up buttons to move to the "4868 m" position, the frame displayed is the frame of the "0 m" position again.

Image


The phenomenon is slightly less noticeable when using the "partial video acceleration" mode.

A Veloreality v1.50.117 backup works fine.
Last edited by Bradox78 on Mon Jan 08, 2018 5:57 am, edited 2 times in total.
Lynx VR Trainer v1 - PowerTap G3 Alloy Rear Wheel - Garmin GSC-10 speed/cadence sensor and heart rate monitor - Dynastream ANTUSB-m stick - Asus Vivo PC X (Intel Core i5-7300HQ, GeForce GTX 1060, 8 GB RAM, 128 GB SSD, 1 TB HDD, Win10 64 bits).
User avatar
admin
Site Admin
Posts: 737
Joined: Fri Nov 01, 2013 5:46 pm

Re: [v1.5.0.135] Custom rides : video area does not always track video accordingly to position of the slider

Post by admin »

Are you using AMD/ATI video card?
VeloReality Forum Administrator
User avatar
Bradox78
Posts: 44
Joined: Mon Mar 02, 2015 3:13 am
Location: Near Paris, France

Re: [v1.5.0.135] Custom rides : video area does not always track video accordingly to position of the slider

Post by Bradox78 »

Nope, using a Nvidia Geforce GTX 860M (see my configuration in my signature just bellow).
Lynx VR Trainer v1 - PowerTap G3 Alloy Rear Wheel - Garmin GSC-10 speed/cadence sensor and heart rate monitor - Dynastream ANTUSB-m stick - Asus Vivo PC X (Intel Core i5-7300HQ, GeForce GTX 1060, 8 GB RAM, 128 GB SSD, 1 TB HDD, Win10 64 bits).
User avatar
admin
Site Admin
Posts: 737
Joined: Fri Nov 01, 2013 5:46 pm

Re: [v1.5.0.135] Custom rides : video area does not always track video accordingly to position of the slider

Post by admin »

Sorry for not noticing your sig. It that I have problems with some AMD cards that sounds close to what you've described. Anyways I'll try to fix it ASAP and get back to you
VeloReality Forum Administrator
User avatar
admin
Site Admin
Posts: 737
Joined: Fri Nov 01, 2013 5:46 pm

Re: [v1.5.0.135] Custom rides : video area does not always track video accordingly to position of the slider

Post by admin »

I think I fixed it. Please verify
VeloReality Forum Administrator
User avatar
Bradox78
Posts: 44
Joined: Mon Mar 02, 2015 3:13 am
Location: Near Paris, France

Re: [v1.5.0.135] Custom rides : video area does not always track video accordingly to position of the slider

Post by Bradox78 »

Thanks Kostya. I will test the fix tonight (CET).
Lynx VR Trainer v1 - PowerTap G3 Alloy Rear Wheel - Garmin GSC-10 speed/cadence sensor and heart rate monitor - Dynastream ANTUSB-m stick - Asus Vivo PC X (Intel Core i5-7300HQ, GeForce GTX 1060, 8 GB RAM, 128 GB SSD, 1 TB HDD, Win10 64 bits).
User avatar
Bradox78
Posts: 44
Joined: Mon Mar 02, 2015 3:13 am
Location: Near Paris, France

Re: FIXED [v1.5.0.135] Custom rides : video area does not always track video accordingly to position of the slider

Post by Bradox78 »

Problem fixed with v1.5.0.138 ! ;)
Lynx VR Trainer v1 - PowerTap G3 Alloy Rear Wheel - Garmin GSC-10 speed/cadence sensor and heart rate monitor - Dynastream ANTUSB-m stick - Asus Vivo PC X (Intel Core i5-7300HQ, GeForce GTX 1060, 8 GB RAM, 128 GB SSD, 1 TB HDD, Win10 64 bits).
Post Reply